1. TEE (T-Shaped Fitting)

  • Function: Connects three pipes, allowing fluid to flow in two different directions.
  • Use Case: Ideal for joining a vertical drain line with a horizontal one.

2. Y TEE (Wye Fitting)

  • Function: Connects three pipes in a Y shape, directing flow at a 45-degree angle.
  • Use Case: Used to branch off a main drain line, reducing turbulence and resistance.

3. 45 Degree Elbow

  • Function: Changes the direction of a pipe by 45 degrees.
  • Use Case: Useful for creating gentle bends in a piping system to avoid sharp turns.

4. 90 Degree Elbow

  • Function: Changes the direction of a pipe by 90 degrees.
  • Use Case: Commonly used to make right-angle turns in the piping system.

5. Coupling

  • Function: Connects two pipes of the same diameter.
  • Use Case: Ideal for extending pipe lengths or repairing a damaged section.

6. Female Adapter SLIP x FIPT

  • Function: Connects a PVC pipe (slip end) to a threaded male pipe (FIPT).
  • Use Case: Used to transition from a smooth PVC pipe to a threaded connection.

7. Male Adapter SPG x MIPT

  • Function: Connects a spigot end (fits into another fitting) to a threaded female pipe (MIPT).
  • Use Case: Used for connecting a spigot end PVC pipe to a threaded female connection.

8. Male Adapter SLIP x MIPT

  • Function: Connects a smooth PVC pipe to a threaded female pipe.
  • Use Case: Ideal for transitioning from slip to threaded connections.

9. Female Adapter SPG x FIPT x PLUG

  • Function: Connects a spigot end to a threaded male pipe and includes a plug.
  • Use Case: Used for transitioning from spigot end to threaded connections and providing a seal.

10. Vent Cap

  • Function: Covers the end of a vent pipe.
  • Use Case: Prevents debris from entering the vent system while allowing air flow.

11. Rain Water Outlet

  • Function: Directs rainwater out of the drainage system.
  • Use Case: Used in rainwater harvesting or disposal systems.

12. Reducing Coupling

  • Function: Connects two pipes of different diameters.
  • Use Case: Ideal for transitioning from a larger pipe to a smaller one.

13. Reducing Tee

  • Function: Connects three pipes, with one outlet smaller than the inlets.
  • Use Case: Used to branch off from a larger pipe to a smaller one.

14. Reducing Skew Tee

  • Function: Similar to a reducing tee but with angled branches.
  • Use Case: Used in systems where pipes branch off at angles.

15. End Cap

  • Function: Closes the end of a pipe.
  • Use Case: Used to seal the end of a pipe run.

16. Plug

  • Function: Closes the end of a pipe fitting.
  • Use Case: Provides a removable seal for a pipe end.

17. Non-Return Valve

  • Function: Allows fluid to flow in one direction only.
  • Use Case: Prevents backflow in the system.

18. PVC DWV Swing Check Valve

  • Function: Prevents backflow using a swinging mechanism.
  • Use Case: Used in systems where backflow prevention is necessary.

19. 90 Degree Elbow M/F

  • Function: Changes direction by 90 degrees with male and female ends.
  • Use Case: Used for right-angle turns with different connection types.

20. Flange

  • Function: Provides a method to connect pipes, valves, and other equipment.
  • Use Case: Used where easy assembly and disassembly of pipes are required.

21. Cross

  • Function: Connects four pipes at right angles.
  • Use Case: Used where multiple pipes intersect.

22. Toilet Flange

  • Function: Connects a toilet to the drain pipe.
  • Use Case: Used in toilet installations to secure the toilet to the floor and connect to the drain.

23. Toilet Flange Off Set

  • Function: Provides an offset connection for toilet installations.
  • Use Case: Used when the drain pipe is not directly under the toilet.

24. Floor Drain

  • Function: Drains water from floors.
  • Use Case: Common in basements, showers, and utility rooms.

25. S-TRAP

  • Function: Traps water to prevent sewer gases from entering the building.
  • Use Case: Used under sinks and other fixtures to maintain a water seal.

26. Drain Cover

  • Function: Covers and protects a drain opening.
  • Use Case: Used to prevent debris from entering the drain system.